RevIntegrator for Imaging - Step 2 of 5: Enable RevIntegrator for Imaging

RevolutionEHR contains information that is required to configure the setup of RevIntegrator for Imaging.

Instructions

1. Access Admin > General > Practice Preferences > Partner Integrations > Device Interfaces.
2. If RevIntegrator has not been enabled, click 'Enable.'
3. Make a note of the User Name and Password. We recommend opening a document to copy and paste the credentials to be used later. This will ensure accuracy of data entry. 
4. Access Admin > General > Locations. Within the Location Listing, make a note of the location number assigned to your location. 
5. The information that you have documented in the steps above is necessary to complete the configuration process within Settings.
6. Proceed to Managing File Storage. 

Next Steps

 Continue setting up RevIntegrator for Imaging using the articles below:

1. RevIntegrator for Imaging - Step 1 of 5: Download and PC Requirements
2. This article is the second step in the process. 
3. RevIntegrator for Imaging - Step 3 of 5: Settings Configuration
4. RevIntegrator for Imaging - Step 4 of 5: Configure Your Device to Export to a Folder On Your PC
5. RevIntegrator for Imaging - Step 5 of 5: Configuring the Imaging Device's Profile