Follow the Instructions for RevIntegrator before continuing with these instructions.
Instructions
Setup the Instrument
- Follow the device manufacture's instructions for unpacking, cabling, and powering up the instrument.
- Install the Zeiss i.Scription software to each computer that has a device connected to it.
- Open the software and click 'Settings.'
- Click 'Application.' Make a note of the "Export Directory." It will be similar to C:\ProgramData\pontus\PMS_Export.
- Verify connectivity between the software and device by either, (1) search for a patient {if it produces results; there is connectivity}, (2) beside "Active Devices" there should be at least 1/1 {this indicates one configured and one active device}.
- Optional: Add a Zeiss device to RevIntegrator which will allow patient demographic information to be exported to the device.
- Open RevIntegrator, access Settings and click 'Add Device.'
- Select the Zeiss device. Click 'Add Device.'
- Update the device settings:
- List Timespan in Days: 30 is the default value, but can be changed.
- Password: !20ProfUser07? is the default value, use this password unless it has been changed on your instrument.
- Read Timeout: 0 is the default value and cannot be changed.
- URL: https://iprofp001:8036/iprofiler/httpep is the default value, this should be updated with the name, IP address, or DNS alias of your specific instrument.
- User: iProfPublicUser is the default value, use this username unless it has been changed in your instrument.
- Click 'Save.'
RevIntegrator
- Access Settings > click 'Add Device' > select Zeiss device > click 'Add Device.'
- Within the lower half of the settings screen, verify the "Path" information is the same as what you noted in step #4 noted above. Change the path if necessary.
- Click 'Save.'
RevolutionEHR
In order to take full advantage of the device's capabilities, the Practice Preference named "Stepper Text" should be enabled. Contact Customer Support at 877.738.3471, ext 2, to have this Practice Preference set for you.