Nidek – RevolutionEHR

Follow the Instructions for RevIntegrator before continuing with these instructions.

The cable connections depend on the device.
- If using a USB-to-Serial (RS232) adapter,
  we recommend selecting from the following: Dynex DX-UBDB9, IO Gear GUC232A, Ativa 8280545, Startech 4 Port RS-232 Serial to USB Adapter (Model #ICUSB234).
- The following devices use the interface cable OPIF-11: LM-600, RT-3100, RT-5100, RT-6100, TONOREF II, TONOREF III.
Plug the USB side of the adapter cable into your PC and then plug the manufacturer's cable into the serial port end of the adapter.

Configuration

Open RevIntegrator on your desktop and sign in using your RevolutionEHR credentials.
Click 'Settings.'
Click 'Add Device.'
Select the Nidek device from the list, click 'Add Device.'
The newly added device displays in the top half of the Settings screen. Device settings are displayed in the lower half of the screen. Highlight Port and a dropdown menu icon will be available. Choose the appropriate COM port number.
Click 'Save.'

Settings on the device should be verified with the information in the table below. Update your settings, if needed.

Device	Communication Settings
LM-600	Com mode: NCP10 Baud rate: 9600 Data bits: 8 bit DTR: True Handshake: None Parity: Odd Port: Stop bits: 1 bit CR code: Off Prism Tx: On
RT-3100 RT-5100 RT-6100	I/F Mode: NIDEK, if problems/errors occur, try NIDEK2. The following settings are fixed and cannot be updated: Baud rate: 2400 Data bits: 7 bit DTR: True Handshake: None Parity: Even Port: Stop bits: 2 bit Datacode: ASCII CR code: Yes
TONOREF II TONOREF III	I/F Mode: NCP10 Baud rate: 9600 Data bits: 8 bit DTR: True Handshake: None

Open RevIntegrator.
Access RevolutionEHR > Patients > search for and open a patient > start an Encounter.
Access RevIntegrator and click 'Refresh.' Note: The Refresh button is located by the Patients list and the Patient/Encounter should be listed.
Select a Patient.
Select the device from the Devices list.
Click 'Capture Data.'
Data is captured and the Preview Data screen displays. Review the data.
Click 'Send to RevolutionEHR.'
Access the patient's encounter within RevolutionEHR.
Click 'Refresh.'
The device data is displayed within the encounter.

Device	RevolutionEHR Tests
LM-600	Pupils Lensometry With Prism
RT-3100 RT-5100 RT-6100	Pupils Wavefront Optimized AR Night Time Refractive Data Keratometry Autorefraction Lensometry With Prism Final Refraction With Prism NCT
TONOREF II TONOREF III	Pupils Keratometry Autorefraction