Data captured by Marco Connect is sent directly to the correct patient and exam within RevolutionEHR. It is imperative the correct test is configured in order to store the data sent by the Marco Connect software. The test can be on any screen, however, they MUST be in the encounter template. If the current encounter template does not include the required test, add the test to the encounter. Note: We recommend the test is then added to the encounter template within Admin.
Device and Corresponding Test
The required test depends on which device is sending the data. The following table identifies the device and the corresponding tests that must be configured in the patient's encounter template. Note: If there are two instances of one of these tests within the encounter, the interface will store the data in one of the tests, however, there is no guarantee which instance will receive the data.
Device | RevolutionEHR Tests |
Nidek ARK: 500A, 510A, 530A, 560A 700A, 710A, 730A, 760A 1000 Generick ARK |
Autorefraction Keratometry |
Nidek: LM-500, LM-600, LM-1000, LM-1200, LM1800P, LM-1800PD Generick LM |
Lensometry With Prism |
Nidek OPD Scan III | OPD Keratometry |
Nidek: RKT-770 | NCT |
Nidek: RT-2100, RT-3100, RT-5100, RT-6100 |
Accommodation/Near Add Aided Visual Acuity Autorefraction Final Refraction With Prism Keratometry Lensometry With Prism Phorias Pupils Refraction - Nearpoint Uncorrected Visual Acuity Vergences NCT-This test is needed only if you are using the Marco M3 or TonoRef2 device in addition to the RT-2100/3100/5100. Wavefront and Nighttime AR-These tests are only needed if you are using an OPD as the AR but sending data by way of an RT model. |
Nidek TONOREF ii | Autorefraction Keratometry NCT |