RevIntegrator for Imaging - Settings

Settings need to be completed before using RevIntegrator for Imaging.

Instructions

1. Launch RevIntegrator for Imaging. Note: Use the desktop icon or launch from the Start Menu.
2. Click 'Edit.'
3. Access Settings > Device Interfaces tab. 
4. Click the 'Details' button within RevIntegrator.
5. From the Service Type dropdown menu, select Device.
6. From the Environment Type dropdown menu, select production.
7. Complete the credentials information obtained from the RevIntegrator for Imaging - Setup instructions to include Username, Password, and Location ID.
8. Confirm "Is Selected" is checked.
9. Click 'Test Connection.' A success message displays. 
10. Click 'Save and Close.'
11. Click the 'Details' button within RevIntegrator for Imaging.
12. From the Service Type dropdown menu, select Bridge.
13. From the Environment Type dropdown menu, select Production.
14. Complete the credentials information obtained from within the RevIntegrator for Imaging - Setup instructions to include Username, Password, and Location ID.
15. Confirm "Is Selected" is checked.
16. Click 'Test Connection.' A success message displays. 
17. Click 'Save and Close.'
18. Proceed to File Upload - Profile Configuration.

Additional Information

We recommend reviewing the following articles:

1. RevIntegrator for Imaging
2. RevIntegrator for Imaging - Setup
3. RevIntegrator for Imaging - Managing File Storage
4. This article, Settings, is the fourth step in the process. 
5. RevIntegrator for Imaging - Profile Configuration